|
|
|
|
|
|
 |
ALSCO DuraTex Aluminum Trim Coil Specifications |
 |
Material |
A. |
All ALSCO Trim Coil shall be made of an ALSCO 3105-type aluminum sheet with a minimum tensile strength of 29,000 psi, or equivalent, as referenced in AAMA specification 1482-86 (paragraph 3.2.3). The metal shall be treated on both sides with a chemical conversion coating to ensure excellent paint adhesion and resistance to corrosion. ALSCO DURATEX Trim Coil shall have a high performance, roll-applied, mar resistant, low-gloss textured polyester topcoat. The reverse side of DURATEX Aluminum Trim Coil is coated with a protective gold-tone polyester backcoat to provide additional corrosion protection and durability. All coatings conform to the standard commercial coatings specifications, as referenced in AAMA specification 1482-86 (paragraph 3.2.4). |
| B. |
ALSCO DURATEXTM trim coil is packaged with one roll per carton. All 24” coils shall be packaged with 32 rolls per skid. Coil shall be of the following width, length and thickness:
| Product |
 |
Width |
|
Length/Roll |
|
Nominal Thickness* |
| CTP24 |
|
CTP24 24" |
|
50 feet |
|
.019" |
|
|
Applications |
|
DURATEX’S tough low gloss, lightly textured finish makes it the perfect choice for demanding applications. DuraTex’s brighter white provides an excellent complement to vinyl sidings and windows. ALSCO DURATEX Aluminum Trim Coil is designed for residential and light commercial applications. Trim coil can be field-formed to provide low-maintenance coverings for exterior trim surfaces such as window and door casings, window sills, drip caps, fascias, porch posts, louvers, flashings, etc. Trim sheet shall be attached with color-matched stainless steel or aluminum trim nails. |
|
Applications Considerations |
|
Direct contact of aluminum product(s) with certain dissimilar materials or contact with the water run-off from such materials is likely to result in corrosion, which is not covered by the product warranty. Therefore, care should be exercised to avoid contact of aluminum with any corrosive materials during installation including, but not limited to: pretreated lumber, concrete, masonry cement, stucco, salt, corrosive chemicals, dissimilar metals (copper, zinc, steel, etc.), and roofing systems made with metallic granules of such dissimilar metals. |
|
|
|
|
< Previous Page |
|
|
|
| |
Copyright © 2011 ALSCO® is a registered trademark of Aleris Rolled Products, Inc.
|
|
| |
| |
|
|
|
|
|
|
